Ducati’s desmodromic valve system, also known as “desmo,” is a complex but fascinating technology used in their motorcycles. The term “desmo” is derived from the Greek words “desmo” meaning “bond” or “chain,” and “dromic” meaning “running” or “racing.” In this article, we will explore the basics of desmodromic valves and why Ducati has been associated with them.
What Are Desmodromic Valves?
Valves in an engine control the flow of fuel and exhaust gases, and the camshaft opens and closes them according to the piston’s movement. Traditional valve systems use springs to close the valves, but in desmodromic valve systems, two cams and two actuators are used to open and close the valves without relying on a return spring. This helps to prevent valve float, which is a common problem in high-revving engines.
Desmodromic Valve History
Ducati is well-known for their desmodromic valve system, but they did not invent it. The first patent for a desmodromic valve system was actually filed by Daimler-Benz in 1889. However, it wasn’t until Taglioni implemented the design in the Ducati 125 in 1955 that desmodromic valves became associated with the brand.
Why Use Desmodromic Valves?
Desmodromic valves were initially designed to increase engine revs. They allow engines to rev higher by opening and closing valves more efficiently, without relying on a spring return. This system also helps prevent spring failure, which can limit an engine’s maximum RPM.

Are Desmodromic Valves Hard to Service?
Many people are intimidated by the maintenance of desmo motors, but it is not much different from servicing a regular camshaft-driven engine. Ducati valves might need to be serviced more frequently than other motorcycles, but it is still a straightforward process that can be done by a skilled mechanic or even a DIY enthusiast.
Desmodromic Valves and Belts
In addition to desmodromic valve systems, almost every Ducati motorcycle uses valve belts instead of gears or chains to drive their valves. Belts require tensioning and replacement every five years, but they are lighter and quieter than gears or chains.
Multistrada V4 and Desmodromic Valves
The Multistrada V4 is the first Ducati motorcycle to use a spring-valve return system instead of desmodromic valves. Ducati explained that the switch was made because the Multistrada doesn’t require the high-revving advantages of the desmodromic valve system and that it allows them to maintain the very long maintenance intervals.
In conclusion, while desmodromic valves are a fascinating technology used by Ducati, they are not the only motorcycle manufacturer to use this system. While they allow engines to rev higher, they are not necessarily better than traditional valve systems using springs. However, they are an essential part of Ducati’s unique identity and have contributed to the brand’s racing success over the years.



